Brocade Mobility RFS7000-GR Controller CLI Reference Guide Manual de usuario descargar pdf (Pagina 546)

100

101

532 Brocade Mobility RFS7000-GR Controller CLI Reference Guide

53-1001945-01

Wireless Configuration Commands

self-heal

Wireless Configuration Commands

Use this command to configure self healing.

Syntax

self-heal(interference-avoidance|neighbor-recovery)

self-heal interference-avoidance(enable|hold-time

<0-65535>

retries

<0.0-15.0>

)

self-heal neighbor-recovery(action|enable|neighbors|run-neighbor-detect)

self-heal neighbor-recovery action(both|none|open-rates|raise-power)

radio(

<1-4096>

|RADIO)

self-heal neighbor-recovery neighbors

<1-1000>

(<1-1000>|RADIO)

Parameters

Example

RFS7000(config-wireless)#self-heal interference-avoidance enable

RFS7000(config-wireless)#

RFS7000(config-wireless)#self-heal interference-avoidance hold-time 600

RFS7000(config-wireless)#

RFS7000(config-wireless)#self-heal neighbor-recovery enable

Note: reducing the configured transmit power of radios will ensure

that there is room to increase power when a neighbor fails

RFS7000(config-wireless)#

RFS7000(config-wireless)#self-heal neighbor-recovery neighbors 1 1

RFS7000(config-wireless)#

interference-avoidance

Interference avoidance configuration.

• enable –Enables/disables interference avoidance.

• hold-time <30-65535> – The interval (in seconds) to disable interference

avoidance after a detection . This prevents a radio from changing channels

continuously. Set the hold-time between 0-65535 seconds.

• retries <0.0-15.0> – The average number retries to force a radio to re-run auto

channel selection. Set a value between 0-15.

neighbor-recovery

Neighbor recovery configuration commands.

• action (both|none|open-rates|raise-power) radio (<1- 4096>|RADIO) – Radio

self healing action when neighbors are detected down.

• both – Raises the power to max and open all rates.

• none – Does nothing.

• open-rates – Opens all rates.

• raise-power – Raises the power to max.

• radio – Modifies the action for specified radio(s).

• <1-4096> – A single radio index.

• RADIO – A list (1,3,7) or range (3-7) of radio indices.

• enable – Monitors access ports and attempts to increase coverage on failure.

• neighbors<1-1000> (<1- 4096>|RADIO) – Adds radios as neighbors.

• run-neighbor-detect – Disassociates mobile units, clears current neighbors and

runs neighbor detection.

1 2 ... 541 542 543 544 545 546 547 548 549 550 551 ... 606 607

Comentarios a estos manuales

Sin comentarios

Brocade Mobility RFS7000-GR Controller CLI Reference Guide Manual de usuario Pagina 546

Comentarios a estos manuales

Relacionado con productos y manuales para Accesorios De Computador Brocade Mobility RFS7000-GR Controller CLI Reference Guide