Brocade Network OS Message Reference v4.1.1 Manual de usuario Pagina 125

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 478
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 124
Network OS Message Reference 109
53-1003227-01
BL-1022
8
BL-1022
Message Init Failed: Switch DISABLED because internal ports were not ONLINE, <list of
internal port number not ONLINE>.
Message Type LOG
Severity CRITICAL
Probable Cause Indicates that the switch initiation failed because one or more of the internal ports were not online. The
switch is faulted.
Recommended
Action
Reload or power cycle the switch.
Execute the diag systemverification command to verify that the switch does not have hardware
problems.
Execute the diag post command to make sure that Power-On Self-Test (POST) is enabled.
Additional fault messages precede and follow this error providing more information. Refer to other error
messages for recommended action.
If the message persists, replace the switch.
BL-1023
Message Interface module in <slot string> was reset before initialization completed. As a
result the interface module is faulted.
Message Type LOG
Severity CRITICAL
Probable Cause Indicates that the interface module was reset before the initialization completed.
Recommended
Action
Reload or power cycle the interface module using the power-off and power-on commands. If the
message persists, replace the interface module.
BL-1024
Message All ports on the interface module in <slot string> will be reset as part of the
firmware upgrade.
Message Type LOG
Severity INFO
Probable Cause Indicates that a recent firmware upgrade caused the interface module firmware to be upgraded and
resulted in a cold upgrade. As part of the upgrade, all data path elements were reset.
Recommended
Action
No action is required.
Vista de pagina 124
1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 477 478

Comentarios a estos manuales

Sin comentarios