
Network OS Message Reference 163
53-1003227-01
EM-1051
8
EM-1051
Message <FRU Id>: Inconsistency detected, FRU re-initialized.
Message Type LOG
Severity INFO
Probable Cause Indicates that an inconsistent state was found in the specified field-replaceable unit (FRU). This event
occurs when the state of the FRU was changing during a failover. The FRU is reinitialized and traffic may
have been disrupted.
Recommended
Action
No action is required.
EM-1059
Message <FRU Id or Switch name> with ID <Interface module Id> may not be supported on this
platform, check firmware version as a possible cause.
Message Type LOG
Severity ERROR
Probable Cause Indicates that the interface module inserted in the specified slot or the switch (for compact switches) is
not compatible with the switch configuration software. The interface module will not be completely
usable.
The interface module may only be supported by a later (or earlier) version of the firmware.
Recommended
Action
Change the management module firmware or replace the interface module. Make sure the replacement
is compatible with your switch type and firmware.
EM-1064
Message <FRU Id> is being powered off (based on user configuration) upon receiving a HW
ASIC ERROR, reason:<Fault reason>.
Message Type LOG
Severity CRITICAL
Probable Cause Indicates that the interface module has been powered off because a hardware application-specific
integrated circuit (ASIC) error was detected, and you have selected to power off the problem interface
module when such a condition occurred.
Recommended
Action
Execute the copy support command and contact your switch service provider.
Comentarios a estos manuales