
Network OS Message Reference 229
53-1003227-01
FW-3111
8
FW-3111
Message <Label>, has dropped below upper threshold boundary to in between(High=<High
value>, Low=<Low value>). Current value is <Value> <Unit>.
Message Type LOG
Severity INFO
Probable Cause Indicates that the number of abnormal frame termination frames that the port experiences has dropped
below upper threshold boundary to a value within the acceptable range.
Recommended
Action
Respond to this message as is appropriate to the particular policy of the end-user installation. Check all
loose connections in the fabric.
FW-3113
Message <Label>, is below low boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Message Type LOG
Severity INFO
Probable Cause Indicates that the number of frames with symbol error that the port experiences has fallen below the low
boundary.
Recommended
Action
Respond to this message as is appropriate to the particular policy of the end-user installation. A low
number of symbol errors means the system is operating normally.
FW-3114
Message <Label>, is above high boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Message Type LOG
Severity WARNING
Probable Cause Indicates that the number of frames with symbol error that the port experiences has risen above the high
boundary. Flapping interfaces or loose connections can cause this error.
A high number of symbol errors indicate a deteriorated device, cable, or hardware.
Recommended
Action
Check your small form-factor pluggables (SFPs), cables, and connections for faulty hardware. Verify that
all optical hardware is clean.
Comentarios a estos manuales