Brocade Network OS Message Reference v4.1.1 Manual de usuario Pagina 228

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 478
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 227
212 Network OS Message Reference
53-1003227-01
FW-1043
8
FW-1043
Message <Label>, is above high boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Message Type LOG
Severity WARNING
Probable Cause Indicates that the transmit power value of the small form-factor pluggable (SFP) transceiver has risen
above the high boundary. The transmit performance area measures the amount of outgoing laser to help
you determine if the SFP transceiver is in good working condition or not. If the counter often exceeds the
threshold, the SFP transceiver is deteriorating.
Recommended
Action
Replace the SFP transceiver.
FW-1044
Message <Label>, is between high and low boundaries(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Message Type LOG
Severity INFO
Probable Cause Indicates that the transmit power value of the small form-factor pluggable (SFP) transceiver has changed
from a value outside of the acceptable range to a value within the acceptable range. The transmit
performance area measures the amount of outgoing laser to help you determine if the SFP transceiver is
in good working condition or not. If the counter often exceeds the threshold, the SFP transceiver is
deteriorating.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
FW-1046
Message <Label>, is below low boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Message Type LOG
Severity WARNING
Probable Cause Indicates that the value of the small form-factor pluggable (SFP) transceiver voltage has fallen below the
low boundary.
Recommended
Action
Verify that your optical components are clean and functioning properly. Replace deteriorating cables or
SFP transceivers. Check for damage from heat or age.
Vista de pagina 227
1 2 ... 223 224 225 226 227 228 229 230 231 232 233 ... 477 478

Comentarios a estos manuales

Sin comentarios