
132 Network OS Message Reference
53-1003227-01
DCM-1014
8
DCM-1014
Message Error Node replace model mismatch, chassis disabled WWN: <switch_wwn>.
Message Type LOG
Severity ERROR
Probable Cause Indicates that the replacement switch model is different from the model of switch being replaced; this is
not supported and therefore the chassis has been disabled.
Recommended
Action
Use the same switch model for replacement.
DCM-1101
Message Copy running-config to startup-config operation successful on this node.
Message Type LOG
Severity INFO
Probable Cause Indicates that the running configuration has been copied to the startup configuration on the node.
Recommended
Action
No action is required.
DCM-1102
Message Copy running-config to startup-config operation failed on this node.
Message Type LOG
Severity INFO
Probable Cause Indicates failure to copy the running configuration to the startup configuration on the node.
Recommended
Action
No action is required.
DCM-1103
Message Copy default-config to startup-config operation successful on this node.
Message Type LOG
Severity INFO
Probable Cause Indicates that the default configuration has been copied to the startup configuration on the node.
Comentarios a estos manuales