
416 Network OS Message Reference
53-1003227-01
SULB-1103
8
Recommended
Action
Execute the show firmwaredownloadstatus command for more information. Restart the firmware
operation if needed.
SULB-1103
Message Firmware download completed successfully on <slot/partition>.
Message Type AUDIT | LOG
Class FIRMWARE
Severity INFO
Probable Cause Indicates that firmware download has completed successfully on the specified slot or partition.
Recommended
Action
No action is required.
Execute the show firmwaredownloadstatus command for more information. Execute the show
version to verify the firmware version.
SULB-1104
Message Firmware download failed on <slot/partition> with error (<error code>).
Message Type AUDIT | LOG
Class FIRMWARE
Severity CRITICAL
Probable Cause Indicates that firmware download has failed on the specified slot. The error code indicates the reason for
the failure.
The following table lists the error codes that provide more details on why the firmware operation failed.
TABLE 10 Error messages and error codes
Error message Error code
"Upgrade is inconsistent." 0x10
"OSRootPartition is inconsistent." 0x11
"Unable to access the package list file. Check whether the file name is specified
properly."
0x12
"Red Hat package manager (RPM) package database is inconsistent. Contact your
service provider for recovery."
0x13
"Out of memory." 0x14
"Failed to download RPM package. Check if the firmware image is accessible." 0x15
"Unable to create firmware version file." 0x16
"Unexpected system error." 0x17
"Another firmware download is in progress." 0x18
Comentarios a estos manuales