Brocade Network OS Message Reference v4.1.1 Manual de usuario Pagina 311

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 478
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 310
Network OS Message Reference 295
53-1003227-01
NBFS-1001
8
NBFS Messages
NBFS-1001
Message Duplicate E_Port SCN from port <portnumber> in state <state change name> (<state
change number>).
Message Type LOG
Severity INFO
Probable Cause Indicates that a duplicate E_Port state change number was reported. The neighbor finite state machine
(NBFSM) states are as follows:
NB_ST_DOWN - The neighbor is down.
NB_ST_INIT - The neighbor is initializing.
NB_ST_DB_EX - The neighbor and the switch are exchanging data from their link state record
(LSR) databases.
NB_ST_DB_ACK_WT - The neighbor is waiting for the switch to acknowledge the LSR database.
NB_ST_DB_WT - The LSR database is in the waiting state; synchronization is in process.
NB_ST_FULL - The neighbor is in the finishing state.
Recommended
Action
No action is required.
NBFS-1002
Message Wrong input: <state name> to neighbor FSM, state <current state name>, port
<portnumber>.
Message Type FFDC | LOG
Severity ERROR
Probable Cause Indicates that a wrong input was sent to the neighbor finite state machine (NBFSM). NBFSM states are
as follows:
NB_ST_DOWN - The neighbor is down.
NB_ST_INIT - The neighbor is initializing.
NB_ST_DB_EX - The neighbor and the switch are exchanging data from their link state record
(LSR) databases.
NB_ST_DB_ACK_WT - The neighbor is waiting for the switch to acknowledge the LSR database.
NB_ST_DB_WT - The LSR database is in the waiting state; synchronization is in process.
NB_ST_FULL - The neighbor is in the finishing state.
If this error occurs repeatedly, then there is a problem in the protocol implementation between two
switches.
Recommended
Action
Execute the show fabric route neighbor-state command to check the neighbor state of the port listed in
the message. If the neighbor state is NB_ST_FULL, then this message can safely be ignored. Otherwise,
execute the shutdown and no shutdown commands to reset the port.
Vista de pagina 310
1 2 ... 306 307 308 309 310 311 312 313 314 315 316 ... 477 478

Comentarios a estos manuales

Sin comentarios