Brocade Network OS Message Reference v4.1.1 Manual de usuario Pagina 93

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 478
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 92
Network OS Message Reference 77
53-1003227-01
Chapter
8
Network OS Messages
AG Messages
AG-1001
Message N_Port ID virtualization (NPIV) is not supported by fabric port connected to port
<port>.
Message Type LOG
Severity ERROR
Probable Cause Indicates that the N_Port ID virtualization (NPIV) capability is not supported by the fabric port to which
the Access Gateway is connected.
Recommended
Action
Some blades and ports in a switch may not support NPIV. NPIV functionality cannot be enabled on
such ports and they will not respond to NPIV requests.
On non-Brocade switches, refer to the manufacturer's documentation to determine whether the
switch supports NPIV and how to enable NPIV on these types of switches.
AG-1004
Message Invalid response to fabric login (FLOGI) request from the fabric for N_Port
<port>.
Message Type LOG
Severity ERROR
Probable Cause Indicates that the fabric sent an invalid response to the FLOGI Extended Link Service (ELS) for the
specified N_Port.
Recommended
Action
Check the configuration of the fabric switch.
If the message persists, execute the copy support command and contact your switch service provider.
Vista de pagina 92
1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 477 478

Comentarios a estos manuales

Sin comentarios