Brocade Network OS Message Reference v4.1.1 Manual de usuario Pagina 190

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 478
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 189
174 Network OS Message Reference
53-1003227-01
FABR-1039
8
Recommended
Action
No action is required.
FABR-1039
Message Invalid RBridge ID zero received from principal switch (RBridge ID = <Principal
RBridge id>).
Message Type LOG
Severity WARNING
Probable Cause Indicates that an invalid RBridge ID zero has been received.
Recommended
Action
Check the reason for the principal switch to assign an invalid RBridge ID zero.
FABR-1041
Message Port <Port that is being disabled> is disabled due to trunk protocol error.
Message Type LOG
Severity ERROR
Probable Cause Indicates that a link reset was received before the completion of the trunking protocol on the port.
Recommended
Action
Toggle the port using the no fabric isl enable and fabric isl enable commands.
The port may recover by re-initialization of the link.
If the message persists, execute the copy support command and contact your switch service provider.
FABR-1055
Message Switch <Switchname> will be taken offline and back online for RBridge Id auto
configuration to take effect.
Message Type LOG
Severity WARNING
Probable Cause Indicates that the specified switch has been bounced for the RBridge ID auto configuration to take effect
on the unconfigured VCS switch.
Recommended
Action
No action is required.
Vista de pagina 189
1 2 ... 185 186 187 188 189 190 191 192 193 194 195 ... 477 478

Comentarios a estos manuales

Sin comentarios