Brocade Network OS Message Reference v4.1.1 Manual de usuario Pagina 253

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 478
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 252
Network OS Message Reference 237
53-1003227-01
HASM-1021
8
HASM-1021
Message Firmware operation (<operation code>) was aborted manually.
Message Type LOG | VCS
Severity WARNING
Probable Cause Indicates that the specified firmware operation was aborted manually.
Recommended
Action
No action is required.
HASM-1022
Message Failed to fork firmware child process.
Message Type LOG | VCS
Severity WARNING
Probable Cause Indicates that the firmware operation could not be started due to a software error.
Recommended
Action
Execute the copy support command and contact your switch service provider.
HASM-1023
Message There is no HA connection between the MMs due to firmware incompatibility.
Message Type LOG
Severity WARNING
Probable Cause Indicates that the firmware in the management modules are not compatible.
Recommended
Action
Upgrade the firmware on the standby management module to be the same as the active management
module.
HASM-1024
Message Firmware is not available at <Firmware path on MM> on MM.
Message Type LOG | VCS
Severity WARNING
Probable Cause Indicates that the firmware for the line card (LC) is not available in the management module compact
flash (CF) card. This event can be due to firmware corruption.
Vista de pagina 252
1 2 ... 248 249 250 251 252 253 254 255 256 257 258 ... 477 478

Comentarios a estos manuales

Sin comentarios